• - 300 MHz MIPS Processor
• - Linux Operating System
• - OLED - Display
• - MPEG-2 / H.264 Hardware decoding
• - Tuner: DVB-S, optional: DVB-C, DVB-T
• - Tuner Module, Plug&Play
• - 1 x Smartcard-Reader
• - V.24/RS232 Interface
• - 10/100Mbit Ethernet Interface
• - 1 x Scart (RGB, FBAS or S-Video)
• - DVI
• - 2 x USB 2.0
• - analog modem
• - S/PDIF Interface for digital bit stream out (AC-3)
• - 64 MByte Flash, 256 MByte RAM
• - SATA
  • - for use either as internal SATA HDD 2,5“
  • - or to use for extern eSATA
• - unlimited channel lists for TV/Radio
• - channel-change time < 1 second
• - automatic service scan
• - directly bouquet-lists
• - EPG (electronic program guide)
• - multiple LNB-Switching control (supports DiSEqC)
• - OSD in many languages and skin-support
• - Videotext Decoder
• - extern 12V power supply 
  
  DreamBox DM800 technical data
  
  DBS-Tuner mit DVB-S2:
• Frequency Range 950 .... 2150 MHz
• Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
• Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC
• DVB-S2: 10 – 31 Mbaud/s (8PSK) , 10 –30 Mbaud/s (QPSK) 
  
  Video decoder:
• Video Compression MPEG-2 and MPEG-1 compatible, H.246
• Video Formats 4:3 / 16:9
• Letterbox for 4:3 TV-Device 
  
  Audio decoder:
• Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
• Audio Mode Dual (main/sub), Stereo
• Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

           Output analog:

• Output Level L/R 0,5 Vss on 600 Ohm
• THD > 60 dB (1 kHz)
•     Crosstalk < -65 dB 
  
  Output digital:

• Output Level 0,5 Vss on 75 Ohm
• Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
•     S/PDIF-Output optical, Toslink 
  
  Ausgang Video:

•     Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm 
  
  Video parameter:

• Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
•     Teletext filter in conformity with ETS 300 472 Standard 
  
  TV-Scart:

•     Output: FBAS, RGB, S-Video 
  
  Serielle Interface RS 232:

• Typ RS232 bidirectional
• Bitrate 115,2 kBit/s max.
• Plug Connector SUB-D-9
•     Function: Update of Firmware 
  
  Ethernet:

• 10/100 MBit compatible interface
•     Function: Update of Firmware 
  
  Analoge modem:

•     analoge modem for Internet connection 
  
  SATA Interface:

•     - for use either as internal HDD 2,5“ or eSATAor internal 2,5" HDD 
  
  USB

•     2 x USB 2.0 Host 
  
  LNB power and polarisation per tuner:

• LNB Current 500mA max.; short-circuit-protected
• LNB Voltage vertical < 14V no load, > 11,5V at 400mA
•     LNB Voltage horizontal < 20V no load, > 17,3V at 400mA 
  
  Count of active satellite position:

• DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
•     DiSEqC - Rotor Control 
  
  Power consumption:

•     < 15W at 12V 
  
  External PSU

• Input:
  110-240V AC / 50-60Hz / 0,6A
•     Output:
  12V = / 3,0A
  
  Physical specification:

• Ambient Temperature +15°C...+35°C
• Humidity < 80%
• Size (W x D x H): 195 mm x 140 mm x 40 mm