|
|
|
|
| CNC-602A Injector Cleaner & Tester,630USD |
|
|
| Model No.︰ | - |
| Brand Name︰ | - |
| Country of Origin︰ | China |
| Unit Price︰ | USD $ 630 / pc |
| Minimum Order︰ | 1 pc |
|
|
|
|
|
Item： Details：
CNC-602A
CNC-602A
Injector Cleaner & Tester
Product ID: CNC-602A
Brief Introduction:
Developed with the technology of ultrasonic cleaning and fuel pressure control, Launch injector cleaner & tester CNC-602A is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.
Feature:
With dynamic ultrasonic cleaning technology applied, it can perform thorough cleaning in two alternative working modes to bring ultrasonic cleaning into full play.
With automatic control and digital technology, it can give total control to cleaning and testing through monitoring major parameters in different working conditions.
9 incorporated functions: Ultrasonic cleaning, on-vehicle cleaning, back-flush cleaning, flow uniformity test, leak test, flow pattern test, injection test, minimum pulsed flow test and auto cleaning test.
Adjust pulse width and speed at anytime and test the minimum pulsed flow of the injector.
Drain demo oil at anytime during cleaning.
Test and clean single-point injectors such as TBI, CFI, ECI and CIS and multi-point injectors.
User-friendly key board, easy to view and operate.
Specification:
Ambient temperature: -10ºC~40ºC
Relative humidity: <85%
Environment magnetic intensity: <400A/m
Power: AC110V~220V 50Hz/60Hz
Input power: 450W
Ultrasonic cleaning power: 110W
Range of pressure adjustment: 0~0.65MPa
Length of pressure adjustment: 0.004MPa
Range of sumulating test: 10~9990rpm
Step length of simulating test: 10rpm
Counting range: 1~9999 times
Timing range: 1~9999 seconds
Range of pulse width: 0.5~25ms, step length 0.1ms
Volume: 2500ml
Dimensions: 380mm x 390mm x 450mm
|
|
|
|
|
|
|
|
|
